Universal 12v - 3.5kw Lightweight Interior Water Cab Heater - Motorsport Kit Car etc

3.5kw Lightweight Heater 12v The 3.5kw Lightweight Heater is our second smallest and lightest hot water based heater after the 2.2kw Micro Heater, sacrificing a little weight for performance this unit can be used as a more powerful defrost heater and can also provide more cabin heat.

The heater uses a specially designed copper & brass heater core offering excellent heat transfer capabilities for its size, this is accomplished using a high flow core design, high fin density and ultra-thin wall tube. A lightweight and efficient axial fan is used to draw air through the heater core and expel it through 4x 51mm (2") outlet nozzles. The Axial fans are at minimum 50% lighter and use 25% of the power over traditional centrifugal blowers.

The 3.5kw Lightweight Heater is ideal for use in small vehicles for defrosting windscreens, or as a secondary heating device for vehicles if you already have a heated windscreen. If you are planning on ducting into the pre-moulded under dash trunking/ducting system, then it would be recommended to step up a size to the 5kw Midi Heater with its more powerful 3 speed centrifugal blower.

The heater comes with 1/2" hose fittings as standard, however AN08 hose adapters are available as an optional extra to allow the fitment of braided hose if regulations do not allow standard rubber heater hose to be run in the interior of the vehicle. Typical weight savings over a production vehicle heating system can be in excess of 6kg.

The fan has no onboard speed control, the simplest way to operate this fan is to use an ON/OFF toggle or rocker switch. If you would like to adjust the fan speed please see our PWM fan controller.
Red Wire +12v
Black Wire Earth
Please ensure your supply is fused appropriately, it is recommended to use a 3a fuse and that your cable is rated higher than the fuse.